3M recommended for sanding, grinding, sawing, sweeping, and insulating with fiberglass.

• 3M™ Cool Flow™ Exhalation Valve for heat and humidity reduction in respirator
• Soft inner layer -- soft against face
• Comfort Straps

Important: Before use, read User Instructions inside.

Use For: Particles such as those from grinding, sanding, sweeping, sawing, bagging, insulation with fiberglass, or processing minerals, coal, iron ore, flour, metal, wood, pollen, and certain other substances. Liquid or non-oil based particles from sprays that do not also emit oil aerosols or vapors.

Do Not Use For: Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos, arsenic, cadmium, lead, 4,4'-methyline dianiline (MDA) or sandblasting; concentrations that exceed 10 times the PEL/OEL, specific OSHA standards, or applicable government regulations, whichever is lower. This respirator does not supply oxygen.

NIOSH Approved: N95

At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil. See insert for approval label.

Time Use Limitation

If respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and replace the respirator.