Trap-N-Kill AGO Mosquito Traps -- 2 Packs

To assemble trap:

• Insert metal screen in bottom half of capture chamber and lock in place with the metal wire, by pressing wire down over the screen.
• Pull apart sticky boards. Insert 1 sticky board into the catch chamber, Sticky Side Facing Towards Center.
• Store extra sticky boards in a cool dry place by folding in half (glue inside).
• Lock the capture chamber halves by inserting tabs and rotating counterclockwise.
• Add clean water to the trap, up to overflow holes. Add 1 ounce of hay or local dried grass (not included) to the water. This creates an infusion that attracts mosquitoes.
• Securely attach the lid to the trap. (If the lid has tear tab, remove tab before attaching lid to trap).
• Seal the capture chamber by firmly pressing into hole of the lid.
• Place traps on the ground, near or under vegetative.

To maintain and refill traps:

• Check Traps on a regular basis to ensure proper operation
• Keep water levels at least 1/4 full at all times.
• Replace Trap if damaged, does not hold water, or has holes greater than 1 mm wide, which allows mosquitoes to enter the water chamber.
• Mosquitoes should not be able to enter or leave the bottom water reservoir in any way.
• Replace the water and hay at 8 weeks or sooner if water becomes foul.
• Replace the Sticky Board at 8 weeks. Discard used Sticky Board in regular trash.
• Maintain Trap-N-Kill A-G-O Mosquito Traps year round. Do not leave Traps filled with water outside if freezing temperatures are expected. Traps may be cleared and stored upside down for winter storage. Continue using Traps in your yard after freezing temperatures have ended.